Allen Pump Action Spinnaker Halyard Cleat

Allen Pump Action Spinnaker Halyard Cleat

A unique, hard-to-find, pivoting cleat that allows the line to run freely until it is pulled out of alignment. Frequently used for spinnaker halyard pump-up systems.

The halyard exits the mast, goes through a cam cleat and usually a fairlead. Then there is some space before the halyard runs through the pump cleat. On the line in this space there is a trap handle on a block, which you hold to pump. The tail of the halyard then continues through a fairlead or cheek block and is taken up by shock cord. As you pump the handle, the pump-cleat goes out of alignment holding the tail and causing the halyard to take up through the cam cleat. As you lower the handle, the pump cleat aligns again allowing the shock cord to take up the tail through the pump cleat, readying the system for another pump if needed.

Max rope size: 1.5 - 4mm

Length: 40mm

Height: 33.5mm

Hole centres: 18mm

Visit Delivery & Shipping Information

We aim to make delivery as straightforward and cost-effective as possible. Please see the details below for shipping options, costs, and restrictions.

If you wish to return any items you can do if it is within 14 days of purchase, and please ensure you enclose the following details:

• Reason for Return Or if an exchange is needed the appropriate description of the new item
• Receipt for cost of return of item (refund can only be give for item being retuned due to a fault or incorrect product sent)
• Invoice number

A refund will be given if Items are faulty, items you wish to be refunded or exchanged must be in as new condition and not used, in original packaging in re-saleable condition.

If items are faulty an exchange for like for like will be applied. If this is not possible a refund will apply.